Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts & Accessories

$9.99
- Plastic spoke covers in a variety of colors - 300mm cut to fit length - 36 pieces - enough for one wheel - Increases visibility and demands attention
$2.00
Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.
$9.00 - $15.99
These rim valves are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance. Key features: - To be used exclusively with Bontrager Tubeless Ready (TLR) wheels - Required for Bontrager's Tubeless Ready (TLR) system setup - Removable valve core for easy sealant fill - Silver MTB valve is compatible with all Bontrager Mountain wheels except: Line XXX, Kovee XXX, and Line Pro 40 - Alloy Road Tubeless Rim Valve is compatible with all Bontrager alloy TLR road wheels
$47.00
Your riding doesn’t need to stop when the weather gets cold. Features - Giant road thru-axle trainer axle - Alloy construction - For use on 2017+ Giant road bikes with a 142x12mm rear thru-axle
$11.99 - $14.99
The Muc-Off Tubeless Rim tape is made from their proprietary performance material with a pressure-sensitive adhesive to provide just the right amount stretch whilst maintaining durability and strength needed to create a lasting airtight seal. Semi-transparent material makes locating the valve hole easy.
$49.99
Tannus Armour Tubeless inserts are the result of years of top level multi-cell foam manufacturing mixed with extensive professional riding experience. At the heart of Tannus is the patented Aither Technology; a multi-cell foam compound that forms the structure of the Armour. The inserts are designed to displace small impacts while offering a spring-like rebound for a smooth yet playful ride. - 3% Faster than standard tubeless - Flexible sidewall stabilizing "Wings" for smoother ride quality, with 50% more vibration damping - 20mm of rim protection - Not a sealant sponge – keeps sealant where it belongs - Easy Installation (5 Minutes, No tools required) - 150g - About as much as a standard tube (a little lighter)
$14.99 - $15.99
This rim tape is crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance. - TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion - Tape is designed for wider Plus and Fat wheels - Can also be used as a universal tubeless solution for non-Bontrager rims - Use only with Bontrager TLR rim valve with round base - Rim tape replacement is recommended if removed from the wheel - One roll is 5m (197") in length
$24.95
- End caps for Origin8 MT-2100 hubs
$24.95
- Replacement end caps for MT-4100 hubs
$5.99
- Flanged 15mm axle nuts - Durable chromoly construction - Spacing / Axle: B/O
$5.99
- Flanged 15mm axle nuts - Durable chromoly construction - Spacing / Axle: B/O
$58.00 - $65.00
Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The stainless steel axle end allows for mounting of the hitch provided with your trailer. - Hardware for attachment of the hitch is included; the hitch, itself, is not. - No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
$3.00
- Replacement freehub bodies include pawls and springs pre-installed - M-Pulse hubs: six pawls are equipped with Neodymium magnets engaging every 1.66 deg - E-Sync hubs: fast 8.18 deg engagement with reinforced high-torque pawls - HG 11sp road FH body
$100.00
- Replacement freehub bodies include pawls and springs pre-installed - M-Pulse hubs: six pawls are equipped with Neodymium magnets engaging every 1.66 deg - E-Sync hubs: fast 8.18 deg engagement with reinforced high-torque pawls - HG 11sp road FH body
$6.50
- Replacement freehub bodies include pawls and springs pre-installed - M-Pulse hubs: six pawls are equipped with Neodymium magnets engaging every 1.66 deg - E-Sync hubs: fast 8.18 deg engagement with reinforced high-torque pawls - HG 11sp road FH body
$34.95 - $46.45
Replacement Cassette body for Origin8 hubs
$4.99
Rubber rim strips for 24-inch diameter fatbike rims. - Sold individually
$5.99
- Eady to install - Spoke mounted - 2 per set
$19.99
Thru-Axle hub adapters allow the use of 100 mm front thru-axle hubs in 100 mm QR forks. -Allows the use of modern thru-axle wheels in forks designed for quick-release compatible hubs -100 mm front hub spacing only -CNC-machined AL-6061
$34.99
The super tough Rock sprocket is built to last. Made from full CNC’d, 6.5mm thick 7075-T6 aluminum for superior strength and 7 half depth reliefs for a clean look and weight reduction. Featuring offset ?” teeth provide improved chain alignment on all set ups.
$50.00
The multi-level machined 7075 aluminum FND Sprocket is available in spline or bolt drive options. The 7mm thick spline drive version eliminates the need for the sprocket fixing bolt and is available for 48 spline, 19mm or 22mm spindle sizes. The bolt drive sprocket is 6mm thick and includes a 22mm spindle adapter.
$39.99 - $40.00
The Kink Bedlam sprocket puts material where you need it, and takes it out from where you don’t. The simple spoked design gives a clean balanced look, while half depth reliefs on the back side remove additional unneeded material to keep the weight down. Accurately designed and lightly chamfered teeth create a smooth ride and chain seating. Fully CNC machined from 6.35mm thick 7075-T6 aluminum means this sprocket is built to take a beating.
$39.99
KINK SPLINE-DRIVE ASTRO SPROCKET The Astro sprocket is a true mix of form and function. Using heat-treated 4130 chromoly steel enables this sprocket to use thin spoke like patterns which create the unique look. The design itself inspired by the structure of an atom, has increased strength over similar spoke style sprockets due to the intersecting “orbits” or spokes. The Astro sprocket comes in a variety of sizes, and both bolt drive or spline drive options.
$10.99
14-gauge spoke nipples made from durable brass material for a perfectly laced wheel. Product Specifications - Material: Brass - Gauge: 14g - Length: 16mm (5/8") - Quantity: 40pc per pack - Weight: 2oz per pack
$4.00 - $17.00
Whisky Parts Co. Tubeless Rim Tape.
$48.00
The multi-level machined 7075 aluminum FND Sprocket is available in spline or bolt drive options. The 7mm thick spline drive version eliminates the need for the sprocket fixing bolt and is available for 48 spline, 19mm or 22mm spindle sizes. The bolt drive sprocket is 6mm thick and includes a 22mm spindle adapter.
Page 1 of 15 Next page