Saris' Protect-O-Pads are foam blocks that separate and protect your bikes when multiple bikes are being transported. They come in packs of four.
Protect your rides during transport and save your back, too, with Hollywood's Sport Rider rack that carries up to 2 bicycles. Simply set any bike into the wheel holders (that are nice and low for easy bike mounting), then slide the padded universal clamp over the frames to secure the bikes. This great rack also includes Hollywood's No-Wobble system that prevents rack sway and holds your bikes steady even when the road is less than ideal. The Sport Rider folds for easy storage, too, and comes with Velcro wheel straps for top-notch safety. - Max weight capacity: 45 lbs per bike - Hitch Size: fits both 1 ¼ and 2-inch - Not to be used on any trailer, fifth wheel, or towed vehicle
The arch is arguably the most important engineering feat in human history. One look at Saris’ Bones 2-Bike rack would make any ancient Roman proud. With three incredibly strong, arched leg mounts and two arched arms, you can rest assured that your bike is in solid hands. Six highly adjustable straps, each equipped with soft coated hooks, hold the rack down, while the three legs have grippy rubber feet to provide a sturdy base. Ratcheting anti-sway straps ensure a tight grasp on your bikes. The Bones is made out of 100% recyclable, non-rusting parts and fits almost all vehicles—even those with spoilers.
Saris’ Bones 3-Bike rack unites utilitarian strength and modern style. Crafted of incredibly strong, injection-molded plastic, the four arched leg mounts and two arched arms cradle your bikes on different levels to minimize unwanted handlebar and seat contact. Six highly adjustable straps, each equipped with soft, vinyl-coated hooks, hold the rack down, while the four legs have grippy rubber feet to provide a sturdy base that won't harm your vehicle's finish. Ratcheting, soft-touch, anti-sway straps ensure a tight grasp on your bikes. The Bones is made out of 100% recyclable, non-rusting parts and fits almost all vehicles—even those with spoilers. Plus, it folds fast for easy portability and storage.
Replacement Wheelstrap for Holdup. Adds 2.5" of Length to Forklift and Frontloader Rear wheel mounts.
Leave it to Hollywood to invent a clever way to carry your bikes on the same hitch-mounted rack system you use to pull a trailer. Their Tow 'n Go rack allows the hitch to perform double duty for travelers who like to bring their bikes as well as their boat, camper, or any other item pulled by the hitch. Plus, this sweet rack carries up to 3 bikes, which are secured by Hollywood's paint-job-friendly rubber stabilizer straps. - Requires additional parts to tow trailer (sold separately) - Weight Capacity: 35 lbs per bike - Weight: 25 lbs - Arms fold down when not in use - For 2-inch hitches only - Not to be used on any trailer, fifth wheel or towed vehicle
Give your bike first-class treatment on the way to the ride. Saris' Traps Single Track mounts easily on the floor of your cargo area or truck bed and holds 2 bikes. Included is mounting hardware for three Traps fork mounts (sold separately).
The Trike Adapter 3 can be used on any Sport Rider SE model. It is an adapter that allows users to carry one trike and one bike. When used with base model HR1450Y-E or HR1455Y-E it allows users to carry 1 electric trike (up to 100 lbs) and 1 electric bike (up to 80 lbs).
Tailored to precisely fit flush-mount factory side rails, RidgeClips secure the RidgeLine Towers to your aerodynamic rooftop. Created in different designs to fit specific vehicles, they have a brilliant clip design that’s super strong, easy to install, and holds on tight. - Ingenious clips designed to attach RidgeLine Towers to flush-mount factory side rails - Range of shapes lets you find the precise, secure fit specific to your vehicle - Unique inner and outer clip design delivers exceptional hold - Powder-coated stainless steel provides maximum strength and durability - Sold in sets of four – just one kit sets up your system
Thule's AeroBlade Edge is an integrated foot/load bar with a low-profile, aerodynamic design for vehicles with a factory roof rack. The AeroBlade bars use BoxBeam construction, making them some of the strongest load bars on the market with a capacity of up to 165 pounds. In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. The feet fit your vehicle's roof rails without a fit kit and they're T-track compatible as well.
Fat bike skewer and thru axle tube adapters for the Kuat Trio roof rack.
Transfer cable lock kit including one locking cable per tray and a matching lock for the hitch pin.
Protect both your bikes and your pick-up on your next adventure with heavy-duty, adjustable, padded protection. Features - Flexible padding adjusts across a wide range of tailgates and large handle opening provides backup camera visibility - Bikes remain securely in place with integrated bike separation and multiple-position strap anchors - Bikes and pick-up trucks are protected during transport with heavy-duty vinyl, adjustable padding - Gear can be stored securely, even while driving, due to the inside-facing mesh pockets Technical specifications - Dimensions: 59 x 16 x 2.75 inch - Weight: 6.5-pound
Thru-axle adapter for the Kuat TRIO rack.
Simply insert Saris' Hitch Tite into the hitch receiver to give your Saris bike rack (sold separately) extra stability. The Hitch Tite is compatible with the Bike Porter Hitch 2-Bike, Freedom, Axis Steel, Axis Aluminum, Cycle-On, and T-RAX Sport racks.
Secure peace of mind and your trunk rack to vehicle with our Trunk Rack Lock. - Secure bike rack to vehicle to deter theft. - Cables secured within closed trunk. - Includes 8 ft. cable. - Includes 2 keys.
For those cases where fitment just isn't right. The Hi-Lo is a 2" hitch Extension & Rise/Drop built with Kuat style. It provides 7" or 10" of extension and 2.125" of rise/drop. The Hi-Lo comes with a threaded hitch pin to ensure a tight fit in your receiver. Approved for use with the Kuat NV 2.0, Base 2.0, Sherpa 2.0 and Transfer family.
Transporting tandems has never been easier than with Thule’s Tandem Bike Mount. Its unique pivoting fork mount allows fast, easy, one-person loading and it easily converts to carry single bikes. Boasting a corrosion-resistant aluminum tray, the Tandem Bike Mount includes tough nylon clamps and a stainless-steel skewer, too. It fits on square and round crossbars (sold separately).
RockyMounts' Clutch SD is a tough fork-mount bolt-on bike rack. It interfaces perfectly with bed channels in trucks from Toyota, Nissan, Chevy, and GMC and couldn't be any more simple to use. The Clutch SD fits a 9mm fork axle, and the cast aluminum body has a center opening that easily accommodates a cable lock (sold separately).
Premium trunk-mount bike carrier with raised platform designed to keep the rear lights and license plate visible, and fits wide range of vehicles including those with a spoiler. - Maximum fastening security to your vehicle with steel cables - Quick and easy mounting to car thanks to simple user interface and intuitive torque-limiting tightening system - Firm carrier hold and vehicle protection with twin hook attachment and rubber protection pads - Improved visibility of rear lights and license plate with raised platform design - Easy mounting of bikes with adjustable/removable bike arms and Thule AcuTight torque limiter knobs that click when optimal torque is reached - Accommodates up to 127cm/50" wheelbase bikes - Simple to fasten wheels, thanks to long wheel straps with pump buckles - Locks the bike to the bike rack and the bike rack to the roof racks (locks included) - Folds flat for easy transport and convenient storage - No assembly required - Possible to open vehicle trunk without any mounted bikes Technical specifications - Max number of bikes: 2 - Load capacity: 66 lb - Max bike weight: 33 lb - Dimensions: 23 x 50 x 47 in - Folded dimensions: 9.4 x 30.7 x 21.3 in - Weight: 27.6 lb - Carbon frame compatible - Rear lights and number plate visible with bikes mounted - One Key System compatible - Lockable bike-to-rack - Lockable rack-to-vehicle
Two 13-foot or 10-foot locking straps with One Key locking cylinders. - Two locking straps - Steel cables inside a theft-resistant nylon sleeve provide a dual-layer locking system - Lightweight and corrosion resistant aluminum buckle - Lock housing rubber-coated to prevent vehicle and equipment scratches - Two One-Key lock cylinders included
Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks
It's road trip time! Bring along up to two bikes with Sunlite's HB-226 Receiver Rack. This versatile rack tilts downward so you can access your car's cargo space, and the carry arms fold down when not in use for compact storage. It fits either a 1.25-inch or 2-inch receiver, and the no-wobble bolt eliminates rack movement inside the hitch so your bikes stay stable all drive long. The carry arm spacing accommodates a wide variety of frame styles too so you can tote along most styles of bikes with ease, and the tie-down cradle system secures each bike quickly.
Tailor your towers—these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.
Thule's AeroBlade Edge (Flush Mount) is an integrated foot/load bar with a low-profile, aerodynamic design for vehicles without a factory rack. The AeroBlade bars use BoxBeam construction, making them some of the strongest load bars on the market with a capacity of up to 165 pounds. In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. These flush-mount feet will need a fit kit for your specific vehicle (sold separately).
$63.00 - $126.00
Yakima's vehicle-specific Landing Pads are required to mount Yakima Control Towers to your car. One end of the Landing Pad attaches to the Tower and the other end attaches to your vehicle's factory track system. They also have rubber bottoms to protect your vehicle's finish. Select the right model Landing Pad for your vehicle using the Yakima fit configurator.
Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.
Classic steel square bars with black polymer coating. 2-pack. - Standard steel load bar available in a variety of lengths - Plastic coating provides additional grip for rooftop cargo - Check the Thule Buyer's Guide to find out which roof rack fits your car - 118cm / 47 in
The locking threaded hitch pin comes and 8’ security cable allows you to lock the rack to vehicle, and the cable allows you to locks bikes to rack and/or vehicle.
Page 1 of 8 Next page