Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Other
NEW: Please refer to our chart for the correct adapter size you need.
Disc brake adaptors available for Shimano, SRAM, Hope, Hayes, Formula, etc. rotors
CNC machined from 6061 T6511 aluminum. Machined surfaces allow for better caliper alignment and a more rigid brake setup.
The Post Mount standard is universal for front and rear brakes.
Frames and forks that use the post-mount brake interface use a stock size varying from 160mm to 203mm. It’s important to check your frame and fork for the default post mount size before ordering a suitable adapter.
To calculate the size of the required adapter, subtract the frame/fork stock mount size from the desired rotor size.
If you’re using brakes with large calipers (Magura MT5/MT7, Hope Tech V4, Hayes Dominion A4, etc.), please also order a low profile (button head) bolt kit to ensure correct fitment.
Our disc brake adapters do not come with mounting bolts but if needed, we have sets of 4 bolts available.
Not currently compatible with TRP 203mm rotors.
$0.16
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss 240s Shim Ring
$0.16
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings
$1.00
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.
$1.00
Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further.
- M4 x 24mm screw for that extra little push
$1.08
- Allows quick chain removal without tools
- MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~|
- MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~|
- MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~|
- MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~|
- MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~|
- MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~|
- MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
$1.35
KMC 3/16" Master Link Chain Links
- For 3/16" chain, extra wide
- Extra-wide, for non-derailleur bikes: BMX, cruisers, etc
- Perfectly fits on KMC 415H & 415H-NP chains
$1.65 - $2.75
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension
- Uses standard chain pin connector and tool
$1.95
Replacement end plugs for the GA2, GA2 Fat, and GA3 grip models.
- One size.
- Sold as a pair.
- Fits Ergon GA2, GA2 Fat and GA3 models only.
- Designed to fit Trail / All-Mountain MTB handlebars on the market today.
$1.95
Replacement right and left Ergon logo bar plugs. Features the Ergon logo in a vibrant white color. You have the choice of a plug set of the barend and non-barend models
- Right and Left soft plastic bar plugs.
- Sold as a set only.
- Fits most handlebars.
- Can be trimmed to fit various handlebar thicknesses.
- Plug set for GP and GS grips with barends - fits GP2, GP3, GP4, GP5, GS2 and GS3 models only
- Plug set for GP1, GC1 and GS1 grips - fits GP1, GC1, and GS1 only
$2.00
FSA Mega Exo Small Parts.
$2.00
This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers.
- Covers brake hose fitting at the brake lever
$2.09
Replace the top bearing in your YST8300 headset with these caged ball bearings.
$2.09
- Routes cables underneath the bottom bracket
- Will not rust or corrode
$2.50
Use to create your desired chain length in single-speed applications. Only one half link is needed.
- Non-reusable
- Width: 9.4 mm
- Drivetrain Speeds: 1
- Color: Black
- Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC
$2.50
The Gyro G3 upper top plate is designed for use with the G3 detangler.
$2.50
- Alloy spacer converts an 8-speed rear hub to use a 7 speed cassette
- Range: 4mm
- Color: Silver
$2.59
- Model: Derailleur Bolt & Nut
- Compatibility: Mounts rear bracket to frame
Page 1 of 60
Next page