BMX

Kink Velcro Cable Strap with Logo. Sold individually.

The Gyro G3 upper top plate is designed for use with the G3 detangler.

Straight Brake Cable

- Sold in pairs - Allen wrench included

Odyssey's custom-designed Par Ends come standard with all of their grips. Its special plastic composite will not shatter like cheap bar ends do, and they’re very lightweight. The Par End is a combination of the over-the-bar-style cap and the inside-the-bar-style to prevent the inner portion from blowing out like it does on ordinary press-fit bar ends. Comes stock on all of Odyssey's grips.

FIEND RIM STRIPS Kink rim strips are made from a heavy duty yet flexible PVC material and come in an extra wide 32mm width for better tube protection. These rim strips provide full coverage of the rim from any burs or protruding spokes and nipples.

When you can’t even see a part, you might forget about it, but it doesn’t mean its not important. Flat tires are probably the most common bicycle failures. Many times, flats are caused by the rims, specifically the lack of protection from the rims' sharp edges. Good rim strips didn’t exist for BMX rims. They work well and improve the function of any 20 inch rim. If you forget about them, that means they are doing their job.

Rim tape from Subrosa, comes as a pair. High density nylon. 32mm wide.

The Graduate sleeve is the replacement sleeve for the Graduate peg that's made from long lasting, fast sliding plastic. - Sold singly

The M2 lever works with a single cable or Odyssey's dual cable system. - Improved braking power for Gyro users - Left/Right hand compatible

Made of Stolen's proprietary Thermalite material, the sleeve resists cracking and deformation while sliding better than chromoly on most surfaces. These sleeves come stock on the Stolen Silencer & Fiction Troop pegs and will also fit over our chromoly Barrel Peg (with axle washer). - Length: 4.4-inch - Diameter: 1.6-inch - Material: Plastic (Thermalite) - Weight: 0.8- ounce each - Replacement sleeve only - Sold individually

The Belmont PC peg features this durable, replaceable nylon outer sleeve with a 40mm OD sleeve that reduces dropout drag. The 4mm wall thickness provides extended rind life

The GFEpeg Sleeve uses a special PA blend plastic that will out slide and out last other plastic pegs. we have also molded a steel washer into the peg sleeve to keep your peg and wheel in place.

The Belmont PC peg features this durable, replaceable nylon outer sleeve with a 40mm OD sleeve that reduces dropout drag. The 4mm wall thickness provides extended rind life. A 6000 series aluminum core keeps the weight to a minimum and has a 14mm axle bore. A 3/8" adapter is included for your convenience.

KINK BOULEVARD HUB PARTS The Kink Boulevard hub was designed to handle modern day street riding and heavy peg use, without sacrificing on aesthetics or weight. The inner 15mm 7075-T6 aluminum axle uses a floating bearing system, which prevents side-load which could shorten bearing life. The hub shell itself is fully CNC machined from tough 7075-T6 aluminum, creating a strong body and flanges that can take plenty of stress from the spokes

The Kink Drift pegs are made of a tough 7075-T6 aluminum core and replaceable durable nylon composite outer sleeve. Kink spent nearly two years developing this unique nylon material that provides the perfect combination of slide and wear resistance. When it does eventually wear out, this nylon sleeve can easily be replaced so your pegs slide like new. - Nylon sleeve only

The Yukon wheel features the Kink Yukon rear cassette hub and is laced up to the Kink Atlas rim. This 36-hole wheel is hand laced, then tightened and trued to specifications. It’s 3x lacing pattern, 14-gauge spokes and brass nipples provide massive strength to stand up to plenty of riding abuse. All Kink wheels are wrapped with a Kink rim strip to provide increased protection between the rim and tube

Single screw type removable gyro tabs. Fits most BMX frames with removable headtube gyro tabs. Product Specifications - Type: Single Screw - Includes: 2 Tabs and 2 Screws - Weight: 0.5oz

The Gost pads feature a unique design to make install and set up easier. - Improved stiffness by built in toe-in into the pad shape and using a solid extruded aluminum frame - Assembly is simplified by lining up the rim and tightening a M6 female bolt

- New ultra-slim 2014-T6 aluminum seat clamp with replaceable hardware and self-aligning nut. - 6061-T6 aluminum construction. - Standard 1-1/8-inch size.

The Slim by Four brake pads feature a symmetric shape designed for both forwards and backwards braking. - Custom inner frame helps to stiffen the pad, reducing braking power loss from flex

Replacement Spring, Balls and Retainer Bolts for East-Coaster Hub Also Works with Most KHE Style Freecoasters Weight: 0.2oz

Removable Gryo Tabs - Fits all recent Kink complete bikes and aftermarket frames

Sold in Packs of 5

Sold in Packs of 5

No frills, affordable, durable, plain and simple. The Mission Strafe pegs are a perfect 4.5" long, and include an adapter for use with 14mm or 3/8" axles. Go get your grind on! - Sold individually - Material: Steel - Weight: 11.0-ounce

Broc Raiford signature grips feature a comfortable ribbed design and smooth ends for improved wear resistance. - 160mm lenght - Par Ends Included

- Press fit designed to work the hub's non-drive side collar.

- Upper cables for Odyssey's Gyro G3 (sold separately) - Universal fit. - Upper cables only.

Cornerstone Grip features a ribbed design with Cornerstone logo. - Includes Odyssey Par Ends

The Jake Seeley signature grips feature a gradually increasing rib width design and a tapered core for comfort. - 160mm

- Lower cables for Odyssey's Gyro G3 (sold separately). - Universal fit. - Lower cables only.

Simone Barraco signature model Various rib widths and shapes were used in the design for maximum performance, comfort and durability Proprietary DCR formula rubber Includes Shadow nylon bar ends Length: 160mm Style: Flangeless

The 4140 peg is a 100% heat treated, 4" 4140 chromoly peg made for the streets. Internally butted and externally relieved to save weight. Sold individually in 10mm or 14mm.

Cinema Interlace grips feature a super comfortable waffle-helix hybrid design pattern. The variable height ribs provide a ton of grip, with just enough sink to feel easy on the hands. The flangeless design also comes paired with expanding wedge style plastic barends, a welcome upgrade from standard plug style barends than can easily fall out.

A Teflon coated 510 chain with heat-treated pins and thicker side plates, our 510 chains are built to last. Features a factory-installed half-link and master link. Product Specifications - Size: 1/8" - Length: 100 Links - Includes: Half-Link and Master-Link - Weight: 14oz