Parts & Accessories
The Astro sprocket is a true mix of form and function. Using heat-treated 4130 chromoly steel enables this sprocket to use thin spoke like patterns which create the unique look. The design itself inspired by the structure of an atom, has increased strength over similar spoke style sprockets due to the intersecting “orbits” or spokes. The Astro sprocket comes in a variety of sizes, and both bolt drive or spline drive options.
KINK SPLINE-DRIVE ASTRO SPROCKET The Astro sprocket is a true mix of form and function. Using heat-treated 4130 chromoly steel enables this sprocket to use thin spoke like patterns which create the unique look. The design itself inspired by the structure of an atom, has increased strength over similar spoke style sprockets due to the intersecting “orbits” or spokes. The Astro sprocket comes in a variety of sizes, and both bolt drive or spline drive options.
Axle cones keep the bearings where they're supposed to be and make sure they're aligned just right. Make sure yours are set up right with this Kink Viridian Hub Cone.
What's more important than being able to rely on your rear wheel driver? We're not sure. You should be sure, though, so grab this replacement SDS driver for your Kink Yukon hub. If in doubt: replace. It includes the bushing, so you'll be floating along like butter with no question that you'll have the power you need when you need it.
The Kink Universal Freecoaster Guard is designed to fit with most modern freecoaster hubs. It features a threaded chromoly core that replaces the hubs existing cone nut(s) and also includes a spacing washer for hubs using a wider cone. The nylon guard itself fits over the chromoly core and is injection-molded from ultra-durable nylon material. This guard fits on the non-drive side only.
Hub cones may be small, but they're extremely important for keeping a hub's bearings set up right. Make sure your Kink Yukon is totally dialed with these replacement cones for Yukon hubs.
You put your Kink Ease-Coaster hub through the wringer, but the thing won't die. Instead, you might need to replace the clutch from time to time. This dual threaded clutch works with RHD and LHD drivers and gets you back to going backwards, smooth as silk, for as long as you please.
Freshen up your Kink Boulevard hub by replacing it's internals, like axle, bearings, and cone. To keep it all tight and working perfectly, don't forget this replacement axle sleeve bearing spacer when you're in there!
Don't let your Kink East-Coaster hub get crunchy and rough-spinning. Kink puts really nice bearings in that hub, but if the bearings are starting to wear out like all bearings eventually do, pick up this replacement non-drive side bearing and slap it in there. You might also want to replace the Driver Bearing while you're in there (available separately).
Customize the functionality of your Kink East-Coaster hub. This slack adjustment kit lets you dial in the perfect coaster engagement for seamless transitions specific to your own unique riding style.
$39.99 - $40.00
The Kink Bedlam sprocket puts material where you need it, and takes it out from where you don’t. The simple spoked design gives a clean balanced look, while half depth reliefs on the back side remove additional unneeded material to keep the weight down. Accurately designed and lightly chamfered teeth create a smooth ride and chain seating. Fully CNC machined from 6.35mm thick 7075-T6 aluminum means this sprocket is built to take a beating.
Designed for use with both the Kink East-Coaster and Kink Yukon hubs, the Rear Guard is injection molded from a durable nylon material. This hub guard slides directly over the existing hub hardware, so no additional parts or disassembly are required. This guard fits the non-drive side of Kink rear hubs only.
The Kink Eastman full guard sprocket was designed to take a beating, and it’s built-in guard will protect your chain in the process. The machined crank arm reliefs create proper clearance for all popular cranksets, and the guard offset accommodates all chain widths which give the Eastman sprocket maximum compatibility. It’s technical design creates a clean and symmetric aesthetic, and provides massive strength where it’s needed. Two rotation positions extend the life of the Eastman’s built-in guard even further.
Sealed cartridge bearings last a long time, but nothing lasts forever (except Kink bikes, of course), and eventually all bearings need to be replaced. Keep a set of these replacement bearings around for your Kink Boulevard hub and ensure you're always rolling smoothly.
BMX axles take a lot of abuse, and sometimes they need to be replaced. Kink makes it easy by providing replacement parts like this Incite replacement Incite Axle.
The Kink Universal Driver guard is designed to fit most modern freecoaster and cassette hubs using either an 8T or 9T driver. The guard is made from heat-treated chromoly steel, giving it a ton of strength and long lifespan. The slim chromoly design means it can slide between your existing hub hardware and dropout, which allows for easy installation with only a wrench or socket to loosen and tighten axle nuts
Convert your Kink Yukon Cassette hub to a male axle with with this axle kit specifically for Kink Yukon hubs. - Includes nuts and washers - Nuts have 17mm wrench/socket flats - Axle diameter: 14mm
Axle cones are essential to keeping proper bearing preload and smooth operation of your Kink East-Coaster hub. If yours are messed up, you'll want to replace them ASAP to keep the more expensive parts of that hub in good shape. These replacement axle cones for Kink's East-Coaster hub do just that, setting you up for another worry-free, smooth-coasting session.
If you're the kind of rider who's on the pegs a lot, parts around your wheels and hubs are going to get damaged. That's just how it works. Luckily, Kink knows this and has replacement parts available like this Cone for your Kink Boulevard hub. It's easy to replace your old boogered-up one with this one that's shiny and new.
If the bearings in your Kink Yukon hub aren't as silky-smooth as they once were, don't worry. You can score these replacement bearings for your Kink Yukon hub and get back to that fast-rolling feeling no matter how aggressively you ride. This item includes 2 (two) bearings to service one complete Yukon hub.
Designed exclusively for use with the Kink Boulevard front hub, the Boulevard guard is injection molded from durable nylon material. These guards slide directly over the existing hub hardware, so no additional parts or disassembly are required. This guard can be used on one or both sides of the Boulevard hub, providing protection where you need it.
A replacement Kink Viridian Axle Sleeve is part of a complete hub service. Ensure that new axle or those new bearings are perfectly aligned for long life and smooth spinning by installing a new spacer while you're at it. It's easy, and you'll thank yourself later.
Make sure your new bearings or axle are lined up just right with this replacement axle sleeve bearing spacer for Kink Yukon hub. So simple, yet so important.
Page 1 of 1