Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Hubs

Cinema BMX FX2 Freecoaster Rear Hub
$179.99
The updated team favorite, FX2 freecoaster hub. Featuring proven KHE based internals, a 9T dual-sealed bearing driver with additional bushing, and a super-strong heat-treated Chromoly 14mm axle with 6mm internal hex for easier maintenance. Updated with the DTC system, changing drive side only requires a driver change instead of a whole hub replacement. Slack can be adjusted from 55 degrees up to 180 degrees depending on your preference, and ships with 156 degrees slack as standard. The included nylon CR and DR hub guards keep your hub protected from grinds straight out of the box. - 9T Freecoaster - Axle: 14mm Hollow Heat-Treated Chromoly - Axle Nuts: 17mm Chromoly - Shell: 6061-T6 Aluminum 36-hole - Bearings: 1 x 6002, 1 x 7905, 2 x 6902 + Bushing - Clutch: DTC (Dual Threaded Clutch) - Cones: Threaded Drive Side and Non-Drive Side - Guards: Compatible with Cinema DR and CR hub guards - Slack: Includes 3 Slack Washer For Fine Tuning - Weight: 25.3oz (w/Guards Installed)
Cinema BMX FX Front Hub
$69.99
The FX front hub was designed from the ground up, with modern street in mind. Thicker angled hub flanges optimize the spoke line, creating a stiff wheelset that is protected from grinds with the included Cinema CF nylon hub guards. The recessed bearings remove any chance of bearing seat stretch and ensure the hub continues to roll smooth. A 15mm Chromoly inner axle provides plenty of strength for all the grinds you can throw at it. - Axle: 15mm Hollow Chromoly Center Axle - Bolts: Chromoly 3/8" (17mm Socket / 6mm Allen) - Shell: 6061-T6 Aluminum 36-Hole - Bearings: 2 x 6902 Sealed Bearings - Cones: 7075-T6 Aluminum Push-On Cones - Guards: Cinema CF Hub Guards - Weight: 11.9oz
Cinema BMX VX2 FRONT HUB
$79.99
The VX2 is a high quality, sealed front hub with a super strong 15mm SUJ-2 steel inner axle and a 6061 aluminum hub shell with thick angled flanges to eliminate bearing seat stretch. Combined with the VX2 front hub guards, this hub can take a serious beating.
Cinema BMX FX FREECOASTER HUB
$169.99 - $179.99
The team favorite, FX freecoaster hub. Features KHE internals, a 9t sealed bearing driver, and a super strong heat treated 14mm axle with 6mm internal hex. Paired with the FX rear hub guard, this hub is a beast! Includes 3 slack adjustment washers for fine tuning.
Cinema BMX VX3 Cassette Rear Hub
$159.99
Refined and re-refined, the VX3 cassette hub packs in all the features and durability you want and need in a hub. The design has been updated to a more resilient floating axle system, with the tried and true 14mm heat-treated Chromoly male axle. The SDS driver system also allows you to easily switch between left or right-side drive without any additional parts. Ceramic bushings found inside the 9t driver unit eliminate any blown-out bearings, and spin directly on the axle creating room for increased axle thickness. Finally, the included nylon CR and DR hub guards keep your hub protected from grinds straight out of the box. - Axle: 14mm Heat-Treated Chromoly - Axle Nuts: 17mm 7075-T6 Aluminum - Shell: 6061-T6 Aluminum 36-hole - Hub Bearings: 2 x 6902 - Driver Bearings: Ceramic Bushing - Driver: 9-Tooth - Drive Side: RHD / LHD Switchable (SDS) - Cones: Thread-On - Guards: Includes DR Rear Hub Guard and CR Rear Hub Guard - Weight: 19.6oz (w/ Guards Installed)
Cinema BMX VX2 CASSETTE HUB
$189.99
The refined VX2 cassette hub is truly built to last. The 14mm heat treated chromoly male axle and hub guard compatibility ensure this hub will hold up to any peg abuse you can throw at it. This hub also features the SDS driver system, which allows you to switch between right hand drive and left hand drive.
Page 1 of 1