Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Model Years
- Show Fewer Model Years
Pedals
$750.00
The latest generation of Keo Blade clipless road pedals now adds a new dimension to your training thanks to a power meter. Perfectly integrated inside the left pedal axle, it measures and transmits your watts and cadence in real-time. Born from of expertise and experience at the highest level, they offer outstanding dynamic performance: ultra-lightweight (260g/pair), wide contact area and great aerodynamics. An essential, straightforward, reliable and easy-to-use tool to optimize your performance when training and racing.
- Single power transducer for accurate, comprehensive data
- Carbon fiber blade body, Stainless Steel platform and steel bearings
- The top-level performance of Keo Blade, with the added benefit of a power sensor
- Best-in-class integration, ergonomics, durability and connectivity
- Robust mechanical and electronic architecture
- Keo Grip cleats with 12Nm retention and 6° float
$564.99
Built on the cutting-edge Speedplay Pedal System, Power Zero single-sided power pedals deliver reliably accurate power and cadence data in a race-proven pedal system. This powerful combination creates an unrivaled power pedal that helps cyclists optimize performance by providing the visibility, adjustability and efficiencies needed to break through to the next level. Pair with the Wahoo ecosystem of smart devices for a more full picture of your data and performance, and to track, analyze, share and improve.
- Single-sided power metrics measure cadence from the left pedal; power is tracked and doubled to estimate total power output no matter where you are crushing watts, with lab tested +/- 1% power accuracy
- Simple and intuitive Wahoo Fitness app offers guided instructions on how to install Power Zero's on any bike, calibrate the pedals for accuracy, and perform firmware updates
- Simultaneously connect to three Bluetooth devices while broadcasting to an unlimited number of ANT+ devices
Power Zero is built on on the dual-sided entry Speedplay Pedal System, which maximizes power transfer by putting your foot closer to the spindle. No more fumbling, fussing or kicking your pedal over; leverage a powerful take off when the light turns green and clip in with ease
- Power Zero and the Speedplay Standard Tension Cleat create a secure connection and a streamlined profile. The two form a seamless integration that aids power transfer and increases aerodynamics. The slim profile cleat and rubber texture create enhanced stability when walking in your road shoes off the bike
- The cleat can be positioned on the bottom of the shoe and adjusted fore-aft, left-right and rotationally, allowing between 0-15 degrees of float, allowing the heel to pivot around the center of the pedal. This range of motion in the foot, lower leg and knee increases comfort and enhances pedal efficiency
- Uncompromised durability and minimal maintenance thanks to their stainless steel construction and triple-sealed bearing system
Powered by a rechargeable lithium battery, Power Zero power pedals have a battery life with up to 75 hours, tested and proven to provide accurate power data across changing temperatures that you are sure to encounter while riding
- Pair with the rest of the Wahoo Ecosystem compatible devices for the most connected training experience
$499.99
The Speedplay Nano is a featherweight, dual-sided road pedal that lives up to the demands of sprint finishes, categorized climbs, and tough training sessions. The mix of premium titanium and carbon fiber materials creates a lightweight but strong pedal that will hold up and deliver speed on the breakaway. The integrated cleat system with 3-axis adjustability allows you to precisely dial in your fit for optimized biometrics and increased power transfer.
Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimze fit and enhance performace through better biomechanics.
Designed with the same level of focus and dedication it takes to earn a spot on the podium, Nano is a purpose-built, ultralight pedal that utilizes the proven Speedplay platform to offer every advantage come race-day.
- Weight: 168g (per pedal pair)
- Spindle Material: Titanium
- Spindle Length: 53mm
- Float: Fixed-15º Micro-Adjustable
- Cornering Angle: 37º
- Bearing: Sealed
Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimze fit and enhance performace through better biomechanics.
Designed with the same level of focus and dedication it takes to earn a spot on the podium, Nano is a purpose-built, ultralight pedal that utilizes the proven Speedplay platform to offer every advantage come race-day.
- Weight: 168g (per pedal pair)
- Spindle Material: Titanium
- Spindle Length: 53mm
- Float: Fixed-15º Micro-Adjustable
- Cornering Angle: 37º
- Bearing: Sealed
$485.00
The XPRO 12 SL is the ultimate expression of pedal technology. This is the lightest and most ergonomic road pedal system on the market. The XPRO 12 SL's carbon body and proprietary design create a powerful structure to transfer power from your legs to the road. Power transfer and stability are enhanced with a larger pedal surface area of 725mm-squared compared with the already large surface area of the XPRESSO at 700mm-squared. The ICLIC system, with its pre-opened design, allows for positive engagement and greater comfort. This pedal combined with the ICLIC Float Cleat allows float (angularly and laterally) while clipped in, reducing knee strain. TIME XPRO pedals offer three options for Q-factor to provide riders with more ergonomic options. Finally, the XPRO 12 SL features watt-saving ceramic bearings and a super light hollow titanium spindle, resulting in an overall weight of 87.3 grams per pedal. The carbon blade is also adjustable in 3 positions to optimize engagement tension. The pedal's low stack height keeps the cyclist's sole as close to the center of the pedal axle as possible, which, along with the large pedal surface area, results in incomparable pedaling efficiency and comfort. We recommend a maximum weight of 90kg.
Features
- TIME's ultimate road performance pedal.
- Fast and easy cleat engagement.
- Three tensions settings of carbon blade.
- Low stack height for good clearance.
- Designed to be aero and light weight.
- Cleats included with all pedal purchases.
Features
- TIME's ultimate road performance pedal.
- Fast and easy cleat engagement.
- Three tensions settings of carbon blade.
- Low stack height for good clearance.
- Designed to be aero and light weight.
- Cleats included with all pedal purchases.
$385.00
The Speciale 12 is the ultimate balance between aesthetics and performance. This grippy, lightweight, and strong pedal was developed for the demands of professional enduro, trail, and more. The Speciale 12 features an alloy anodized platform, titanium spindle, and is available in two sizes: Large (69x90mm) for downhill and Enduro, or Small (64x80mm) for trail or Enduro. The pedal is spring-retention adjustable (micrometric) to exceed the demands of the most advanced riders. The Speciale 12 features TIME’s renowned ATAC design for easy entry and mud clearance. TIME’s renowned engagement system allows easy engagement with a positive, predictable entry and release.
- Premium design and performance in all conditions for enduro, trail, and downhill
- Alloy platform body with titanium spindle
- Easy engagement and performance in all conditions
- ATAC cleat design clears mud with every step-in
- ATAC Standard Cleats included
$325.00 - $335.00
The XPRO 12 is the go-to pedal for top racers thanks to its light weight and ergonomic design for countless hours of riding without pedal-induced discomfort. With its carbon body and titanium axle, the XPRO 12 is wildly light but robust. The pedal's large 725mm-squared surface area provides efficient power transfer and vital stability, so you're ready for sprints and explosive efforts. The pedal's bottom fairing helps improve aerodynamics and protect the carbon blade. TIME's patented pre-opened ICLIC system allows for fast and easy cleat engagement, so you are fast off the line. This pedal combined with the ICLIC Float Cleat allows float (angularly and laterally) while clipped in, reducing knee strain. TIME XPRO pedals offer three options for Q-factor to provide riders with more ergonomic options. Tension adjustment on the carbon blade has three positions to precisely manage the pressure of the clamping mechanism. The XPRO 12 uses a titanium axle for a maximum rider weight of 90kg.
Features
- Light, ergonomic, aero performance pedal.
- Fast and easy cleat engagement.
- Three tensions settings of carbon blade.
- Low stack height for good clearance.
- Cleats included with all pedal purchases.??????
Features
- Light, ergonomic, aero performance pedal.
- Fast and easy cleat engagement.
- Three tensions settings of carbon blade.
- Low stack height for good clearance.
- Cleats included with all pedal purchases.??????
$325.00
Ride with rage without compromising safety. This is what best defines the X-TRACK EN-RAGE, our top-of-the-line enduro pedal. The PLUS Ti model features a titanium axle for added strength and improved stiffness all while shaving grams. The wide, forged aluminum body on all PLUS models will increase stability and support across the most challenging terrain.
- Technology: X-Track
- Cleats: X-Track Cleat included (Easy Cleat available separately)
- Cleats standard: SPD compatible
- Retention: 6 to 14
- Body: Forged Aluminum
- Spindle: Titanium
- Platform area: 664mm²
- Platform width: 67mm
- Stack height + cleats: 16.8mm (10.7 + 6.1mm)
- Weight (pedal): 200g
- Weight (pair + cleats): 450g
- Float angle: 6°
- Release angle: 13°
$325.00
The ATAC XC 12 is our lightest off-road pedal, purpose-built for quick windup and trail speed. TIME's premier XC pedal is also designed for your comfort thanks to an ergonomic design. It all starts with simple clip-in thanks to a wide-angle of positive cleat engagement. Once you're in the clipped in, the features of ATAC XC 12 really kick in: Freedom of movement lateral and angular for reduced injuries and muscle fatigue. The pedal's self-cleaning design clears mud and debris each time you step in. Light and strong with a titanium axle and carbon body, ATAC XC 12 offers easy and consistent engagement with tension adjustment to meet your pedal preference and needs. This pedal is ideal for gravel and cyclocross as well.
Features
- Ideal for XC, gravel, or cyclocross.
- Easy clip in and pedal engagement.
- Titanium axle and carbon body for light weight.
- Self-cleaning design to push out mud with step in.
- Tension adjustment.
- Cleats included with all pedal purchases.
Features
- Ideal for XC, gravel, or cyclocross.
- Easy clip in and pedal engagement.
- Titanium axle and carbon body for light weight.
- Self-cleaning design to push out mud with step in.
- Tension adjustment.
- Cleats included with all pedal purchases.
$300.00
The X-TRACK RACE CARBON Ti pedals are specifically created for the most unforgiving courses. The mechanism is designed for easy engagement in all conditions and helps to shed mud and debris when clipping in. The carbon body offers a large contact area, while the titanium axle ensures the pedal is stiff and light: a mere 145 grams underfoot.
- Technology: X-Track
- Cleats: X-Track Cleat included (Easy Cleat available separately)
- Cleats standard: SPD compatible
- Retention: 6 to 14
- Body: Carbon
- Spindle: Titanium
- Platform area: 515mm²
- Platform width: 60mm
- Stack height + cleats: 16.8mm (10.7 + 6.1mm)
- Weight (pedal): 145g
- Weight (pair + cleats): 340g
- Float angle: 6°
- Release angle: 13°
$275.00
KEO BLADE CARBON CERAMIC pedals take the BLADE series to the next level, featuring a Chromoly axle paired with ceramic bearings for even more reliability and performance. Beyond its weight, the larger surface contact area-to-weight ratio is the best in class. Light, aerodynamic and powerful, these pedals have all you need to race with confidence.
- New leading edge profiling for increased aero dynamics and reduced drag
- Improved sealed spindle design to resist water intrusion with dual sealed ceramic bearings and 1 needle bearing
- Better retention lever durability compared to previous design
- Easier clip-in rotation due to improved weight balance
- 3-part high grade stainless steel contact points for higher impact resistance and durability
- 64mm wide platform and 700mm² contact surface provides maximum power transfer and distribution of foot pressure
- Easy clip in/out with composite blade retention 12 (installed)
- Carbon Body, Chromoly + Spindle
- KEO cleats included
$220.00
TIME XYSTO is a robust full-bodied pedal system for DH, Enduro, and aggressive off-road riders. The asymmetrical design fits the natural shape of your sole, with the extra-large platform providing additional support and control. TIME’s proven ATAC technology provides easy entry, retention, and mud clearance.
$214.99
Built to take on anything, the Speedplay Zero road pedal is uniquely qualified to withstand the demands of everything from all-out racing to the epic grind of a double-century. The stainless steel pedal and integrated cleat system offer peak power transfer and exceptional durability, while the customized fit and dual-sided entry will allow you to crank on the pedals in confidence and comfort.
Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimize fit and enhance performance through better biomechanics.
Designed specifically to maximize every performance advantage the Speedplay platform offers, Zero is a lightweight race-ready, multipurpose pedal that’s durable enough to go the distance ride after ride.
- Weight: 220g (per pedal pair)
- Spindle Material: Stainless Steel
- Spindle Length: 53mm
- Float: Fixed-15º Micro-Adjustable
- Cornering Angle: 37º
- Bearing: Sealed
$213.20
The new Revo-DHC is a downhill race pedal which gives all the control benefits of a flat pedal, with the security and efficiency of a clip pedal.
Features
• Extra large 104 x 111mm 6061 body, with CNC machined finish.
• Adjustable pin height for shoe compatibility - 1.5mm to 5.5mm in 1mm increments.
• Proprietary Renthal binding, with easy-entry geometry.
• Super wide range of tension adjustment, for all preferences and uses.
• Triple cartridge bearings, mounted outboard for ground-strike durability.
• Inboard Igus bush with Patent Pending Renthal easy service axle system.
• O-ring sealed end cap and full contact wiper seal, inboard.
• 55mm crank to binding distance (same as the Revo-TRC).
• SPD cleat compatible (supplied with Renthal cleat).
• With standard pin configuration, 622g a pair.
Features
• Extra large 104 x 111mm 6061 body, with CNC machined finish.
• Adjustable pin height for shoe compatibility - 1.5mm to 5.5mm in 1mm increments.
• Proprietary Renthal binding, with easy-entry geometry.
• Super wide range of tension adjustment, for all preferences and uses.
• Triple cartridge bearings, mounted outboard for ground-strike durability.
• Inboard Igus bush with Patent Pending Renthal easy service axle system.
• O-ring sealed end cap and full contact wiper seal, inboard.
• 55mm crank to binding distance (same as the Revo-TRC).
• SPD cleat compatible (supplied with Renthal cleat).
• With standard pin configuration, 622g a pair.
$208.00
The Dagga is our brand new DH pedal. It was designed in collaboration with Chris Kovarik – one of the forefathers of downhill and flat pedal riding. Kovarik's unique and high-impact riding style inspired the Dagga's key features – our largest platform and widest stance ever.
- Meant to be ridden with thick-soled shoes, the Dagga offers improved stability, power and articulation of the bike.
- The Dagga features the same high strength chromoly axle system as other models with a double seal, inner bushing and outer cartridge bearing.
- Largest Q-Factor, largest body, longest and largest amount of pins!
$201.98
The new Revo-TRC is a lightweight, medium size body clip pedal, aimed squarely at trail and enduro riders, BMX racers, and gravel riders.
Features
• 63.5 x 81mm 6061 body, with CNC machined finish.
• Proprietary Renthal binding, with easy-entry geometry.
• Super wide range of tension adjustment, for all preferences and uses.
• Triple cartridge bearings, centrally positioned for durability.
• Inboard Igus bush with Patent Pending Renthal easy service axle system.
• O-ring sealed end cap and full contact wiper seal, inboard.
• 55mm crank to binding distance.
• SPD cleat compatible (supplied with Renthal cleat).
• Lightweight at just 394g a pair.
Features
• 63.5 x 81mm 6061 body, with CNC machined finish.
• Proprietary Renthal binding, with easy-entry geometry.
• Super wide range of tension adjustment, for all preferences and uses.
• Triple cartridge bearings, centrally positioned for durability.
• Inboard Igus bush with Patent Pending Renthal easy service axle system.
• O-ring sealed end cap and full contact wiper seal, inboard.
• 55mm crank to binding distance.
• SPD cleat compatible (supplied with Renthal cleat).
• Lightweight at just 394g a pair.
$200.00
Shimano Ultegra R8000 pedals.
- Pro-level performance and lightweight for the enthusiast
- The legacy of Shimano design, quality and performance
- Carbon-composite body
- Extra-wide platform for a more efficient transfer of power
- Adjustable entry and release tension settings
- 4mm longer axle available
- Low stack height
- 0.7mm lower than PD-6800
- Model Number: PD-R8000
- Series: Ultegra
- Pedal System: SPD-SL
- Average Weight: 248 grams
$200.00
The Speciale 10, while inspired by the premium Speciale 12, stands on its own as a high-performance pedal. This pedal is up to the challenge of whatever downhill, Enduro and trail riding throws your way. Pick from two sizes: Large (69x90mm) for downhill and Enduro, or Small (64x80mm) for trail or Enduro. Grippy and durable, the Speciale 10 features an alloy anodized platform and oversized hollow steel spindle. The pedal is spring-retention adjustable (micrometric) to meet the demands of advanced riders and features TIME’s ATAC design for easy entry, predictable release, and mud clearance for reliable performance in all conditions.
- Designed for performance in all conditions for enduro, trail, and downhill
- Alloy platform body with hollow steel spindle
- Easy engagement and performance in all conditions
- ATAC cleat design clears mud with every step-in
- ATAC Standard Cleats included
$199.99
• All aluminum platform for enhanced durability • Durable cast stainless steel wings • Standard Release, 6° Float included • Concave platform for secure foothold • 8 adjustable pins per side for grip (8mm pins) • Traction pad technology customizable interface • Ribbed body for better traction when unclipped • Chamfered edges to reduce rock-strikes • 57mm q-factor for stability at speed • 4-sided entry / superior mud shedding • Customizable float & release angle • Premium bearing & double seal system • DH
$199.99
For enduro riding and racing, it's all about the Crank Brothers Mallet E pedals. Winner of a Design & Innovation Award for 2016, this pedal features a concave platform for a secure, grippy foothold, and six adjustable pins per side for even more security. The adjustable traction pad interface keeps you in contact with the pedal so you can focus on your line. Four-sided entry ensures your foot will catch quickly and easily, as well as helping the Mallet E shed mud like no other. A 52mm q-factor is your best friend on tight trails, because who wants to be clotheslined by a tree? Not you, that's for sure. Throw in chamfered edges to ward off rock strikes, and a customizable float and release system and you're ready to shred.
Specifications:
- spindle material: forged scm 435 chromoly steel
- body material: 6061-T6 aluminum
- wing material: 17-4PH stainless
- spring material: 300 series stainless steel
- release angle: 15° / 20°
- q-factor: 52mm
- inner bearing type: igus LL-glide bearing
- outer bearing type: enduro cartridge bearing
- adjustable pins: 6 per side for grip
- endcap: hex alloy
- cleat: premium brass cleats with shims included
- weight: 419g per pair
$199.99
Foot, meet pedal. Thanks to the Stamp, you two will be closely acquainted. After scrutinizing data from the outsoles of top mountain bike shoe brands, Crank Brothers discovered that two distinct surface areas can optimize the shoe/pedal bond through the whole range of shoe sizes. The result is the Stamp, a pedal with minimum profile and maximum concavity.
Specifications:
- spindle material: forged scm 435 chromoly steel
- body material: forged 6061-T6
- inner bearing type: igus LL-glide bearing
- outer bearing type: igus LL-glide bearing
- footprint: 100mm x 100mm (small) / 114mm x 111mm (large)
- adjustable pins: 10 per side
- minimal profile: 11mm-13mm thin
- stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu)
- stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu)
- weight: 375g per pair (small) / 405g per pair (large)
$199.79
Torqlite UL Pedals feature a CNC machined ultra-light body with an incredibly thin 17mm platform for extra clearance.
- Large platform for extra stability
- Hardened chromoly replaceable pins
- Heat-treated chromoly spindle
- Sealed cartridge bearings
- Spindle size: 9/16-inch
- 395g/pair
$197.99
Low And Lean
Made from super-strong 6061-T1 aluminum, the double concave body is sleek and light while still giving your foot a nice wide platform to stand on.
Round And Round We Go
Fully sealed 4-bearing design makes for smooth rolling rotations over an extremely long life. And the ability to rebuild makes it nearly unkillable.
Ride Don't Slide
Pins at the front and back of the pedal are angled slightly to provide improved traction and foot comfort. Because pedal bites suck.
Look Good Ride Good
Our top of the line pedals come in 6 different colors so that you can add as much flavor and flair to your ride as you like.
Pedal Envy
More than just a trusty platform for stomping landings and railing around berms, the Atlas Pedal has long been Race Face's top contender. It's strong, thin, concave, lightweight, rebuildable, and ideally suited for getting wild in the woods.
Specs:
- Axle Material: Chromoly Steel
- Body Material: 6061 Aluminum
- Material: 6061 Aluminum
- Platform Height (MM):14.5
- # of Pins: 20 SHCS hex traction pins per pedal (10 per side)
- Platform L x W (MM): 114 x 101
- Weight: 355g
$197.99
Turbine is the most concave flat pedal designed for climbing, mobbing descents and tackling the most demanding terrain where riders are all-in on grip. Covered by a Lifetime Warranty inclusive of crashes and?available in seven colors. The most locked-in feel you can get on traditional flat pedals, for when good grip just isn’t good enough.
- A concave pedal gives riders a locked-in feel by cradling your foot in a "pocket" created by the platform. Turbine is designed with concavity in all ways—front to back, inboard to outboard. With the added grip from the pins, riders can pedal and descend with a more locked-in feel than ever
- Asymmetric pedal platform follows the anatomical shape of a foot—wider at the front than the back—giving maximum support, pin contact and grip. This platform shape also offers slightly better clearance and a better chance of deflecting off ground objects
- Simple, well-proven internal architecture (with a bushing?on the inboard side and bearing on the outboard side) means Turbine eliminates the bearing bump usually found next to the crank threads. Riders get a larger effective platform and can place their feet closer to cranks for better pedaling ergonomics
- 6061 aluminum body with 6mm steel pins and chromoly steel axle
- 115 x 110mm platform with 11 height-adjustable pins per side
- Platform thickness of 20mm at the edge
$197.00
•Pilot = medium platform •Pilot BA = large platform •SPD compatible (2 bolt designs) •Adjustable pin height •Machined alloy body, CNC finish •Sealed bearing and bushing •Tried and tested chromoly heat treated axle
$197.00
•Pilot = medium platform •Pilot BA = large platform •SPD compatible (2 bolt designs) •Adjustable pin height •Machined alloy body, CNC finish •Sealed bearing and bushing •Tried and tested chromoly heat treated axle
$195.00
• Body : Carbon • Cleat : Keo Grip • Axle : Chromo+ • Bearing : Steel • Retention : 08 - COMP • Contact Surface : 705mm2 • Q-Factor : 53mm • Stack : 14.8mm • Weight : 115g
$190.00
Specialized's Boomslang Platform Pedals are insanely thin, yet still wickedly strong. A tapered outside pedal edge provides maximum grip and ground clearance, while the super low-profile design—a mere 10mm at the center—is like a direct telepathic line from your body to the bike. Custom undercut pins provide incredible traction and are simple to remove, and should one break during your ride, each pedal carries four hidden pins for easy replacement.
- Super slick, patent pending, spindle design
- Super low-profile design; 10mm thickness at center
- Custom undercut pins provide “clip in” style grip and easy removal
- Pedal body carriers 4 hidden pins for easy replacement of broken pins
- Tapered outside pedal edge for maximum grip and ground clearance
- Large foot platform for modern day DH, 110x108mm
$187.00
•Pilot = medium platform •Pilot BA = large platform •SPD compatible (2 bolt designs) •Adjustable pin height •Machined alloy body, CNC finish •Sealed bearing and bushing •Tried and tested chromoly heat treated axle
$179.53
With Ride-Tuned external features and patent pending internals, the Revo-F is the new flat pedal of choice. Featuring a two-axis concave pedal body, fully useable pedal platform and a pin system for fine tuning grip levels, the Revo-F offers unrivalled on-trail performance. The Revo-F spins on an extra wide Igus bush and three cartridge bearings, with the internals fully sealed from the elements. Patent pending internals allow easy home maintenance, using standard tools. The Renthal Revo-F is packed with unique features to deliver the ultimate Ride-Tuned on trail performance, tuneable grip levels, ease of maintenance and bomb-proof durability.
- Forged and CNC machined 6061 aluminum pedal body with concave platform. L-100mm x W-104mm
- Ten pins per side, with adjustable pin length. 2.5mm to 5.5mm in 1mm increments
- Three outboard cartridge bearings and extra wide inboard IGUS bushings
- Fully sealed - Inboard full contact lip-seal. Outer O-ring seal
- Home serviceable, with Renthal patent pending axle system
- High grade chromoly axle
$179.00
T2 pedals are designed for trail and enduro use, with a low-profile base platform to support increased stability on aggressive terrain. The body is made from extruded CNC-optimized aluminum for strength to weight ratio, with CNC machined chromoly spindles.
- Utilizing HTs unique proprietary clipless cleat system with adjustable dual tension settings for a secure foot holding under any condition
- Mud-resistant and easy to engage and disengage
- CNC machined chromoly spindles
- Sealed bearings and IGUS bushings
- 4 grip pins on each side
- Dimensions: 68 x 84 x 17 mm
$175.00
PD-R7000 NEW
FEATURE
- Carbon fiber reinforced resin pedal body
- Wide contact area
- 265g/pr (25g/pr lighter than PD-5800)
BENEFIT
- Optimum power transfer
- Lightweight
- Aerodynamic image
- Color: CFRP
- Average weight: 265 g
- Road clearance: 31°
- Binding: Single Sided
- Cleat included: SM-SH11
- Optional cleat: SM-SH10 / SM-SH12
- Pedal Type: Road
- Reflector: SM-PD65
$175.00
The XPRO 10 is TIME's top blend of performance and value in a light weight and ergonomic race-ready pedal. The pedal maximizes power transfer and stability thanks to its large 725mm-squared surface area. The pedal's bottom fairing helps improve aerodynamics and protect the carbon blade. TIME's patented pre-opened ICLIC system allows for fast and easy cleat engagement. TIME pedals are designed to eliminate pedal-induced discomfort. You can precisely manage tightness of the clamping mechanism with three settings of the tension adjustment on the carbon blade. TIME XPRO pedals offer three options for Q-factor to provide riders with more ergonomic options. The pedal's low stack height provides good clearance. The XPRO 10 uses a hollow stainless-steel axle, making it strong but light.
Features
- High performance, light, ergonomic at the right price.
- Fast and easy cleat engagement.
- Three tensions settings of carbon blade.
- Low stack height for good clearance.
- Cleats included with all pedal purchases.
Features
- High performance, light, ergonomic at the right price.
- Fast and easy cleat engagement.
- Three tensions settings of carbon blade.
- Low stack height for good clearance.
- Cleats included with all pedal purchases.
$171.00
At 110 x 105MM, Chromag's Scarab pedals feature one of the widest platforms available, yet thanks to the thin profile and chamfered corners, it has great clearance. Chromag's proprietary extrusion and machined design provides an ultra thin true-concave profile that is only 13mm at platform center. Custom traction pins are made of hardened steel and feature two height options via the removable washer. A shear line reduces pedal damage when the pins are struck. Each pedal features 42 placement options for the ultimate customization. • Low profile 13mm at platform center • True concave design • Custom adjustable height pin • 42 pin placement options • 430g / pair
$165.00
The ATAC XC 10 is a favorite pedal of competitive riders because of its light weight and ergonomic design. The pedal features the lightness of a carbon body with the durability of a hollow steel axle, as well as tension adjustment to fit your needs. Freedom of movement lateral and angular for reduced injuries and muscle fatigue. The pedal's self-cleaning design clears mud and debris each time you step in. The ATAC XC 10 offers easy and consistent engagement with tension adjustment to meet your pedal preference and needs. This pedal is a great option for XC, gravel, or cyclocross.
Features
- Easy clip in and pedal engagement.
- Light hollow steel axle and carbon body for light weight.
- Self-cleaning design to push out mud with step in.
- Tension adjustment.
- Cleats included with all pedal purchases.
Features
- Easy clip in and pedal engagement.
- Light hollow steel axle and carbon body for light weight.
- Self-cleaning design to push out mud with step in.
- Tension adjustment.
- Cleats included with all pedal purchases.
$164.99
Dual-sided, SPD-compatible clipless MTB pedals with lightweight composite body for the fastest racers
CLIP INTO SPEED
With a lightweight composite body to help you fly up the hills, Kovee Pro Clipless Pedals deliver the control, confidence, and efficiency you crave from pedals. When weight and efficiency matters most, reach for Kovee Pro.
PRODUCT DETAILS
- Dual-sided, SPD-compatible XC MTB clipless pedals
- Fully adjustable clip in & clip out tension
- Lightweight composite body with knurling for added grip
- Dual sealed ball bearings with chromoly spindles for smooth spinning durability
- Install direction & torque spec listed on spindle
- Includes cleats and mounting hardware
$163.00
The Pressure is simply a refinement of our ever popular Contact pedal. The Pressure has a longer body than the Contact, but retains the smallest Q-Factor in the fleet. This makes it ideal for DJ and freeride, but many riders do like to use them for DH and trail riding too.
$159.99
Crank Brothers' Candy 3 pedals combine 4-sided cages for super-easy entry/exit with CNC'd aluminum platforms for low weight, great foot stability, and on-trail durability. The Candy 3s feature chromoly axles, stainless steel springs, CNC machined aluminum wings, and an open design that sheds mud fast, making them ideal for sloppy conditions and cyclocross. They're also enhanced with inner needle bearings and water-tight internals for consistently smooth pedaling.
$159.99
• Cast stainless steel body • Durable cast steel wings • Minimal & lightweight • 4-sided entry / superior mud shedding • Customizable float and release angle • Traction pad compatible (included) • Hex alloy endcap • Premium bearings • Double seal system • Gravel, Trail and XC
$159.99
Chase your dreams with the KEO 2 MAX CARBON pedal. The large contact area offers perfect power transfer from your legs to your bike. The carbon body provides a lightweight, efficient platform, while the Chromoly+ axle offers reliability in all conditions. Install your pedal, adjust the tension, and you're ready to ride.
- Technology: Spring
- Cleats: Keo Grip
- Retention: 8 to 12
- Body: Carbon
- Spindle: Chromoly+
- Platform material: Stainless Steel
- Platform area: 500mm²
- Platform width: 60mm
- Q Factor: 53mm
- Stack height + cleats: 17.3mm (11 + 6.3mm)
- Weight (pedal): 125g
- Weight (pair + cleats): 312g
$159.99
Dual-sided "Pop-Up" clipless pedal with AL6061 die-cast body and CNC platform
- LSL sleeve bushing and sealed bearing
- 9/16" CNC machined Chromoly spindle
- Shimano SPD style cleat with 15º float
- Platform size: 105mm x 103mm
$155.99
- All-road race-inspired dual-sided clipless pedal
- Lightweight yet durable carbon fiber/nylon composite platform for added stability
- CNC-machined chromoly spindle
- 3 LSL sleeve bushings
- Shimano SPD style cleat with 6° float
- Fully adjustable tension
- Platform size: 86mm x 78mm
- 295g per pair
- Size: 9/16"
- Cleat Type: SPD
- Material: Carbon/Nylon
$150.00
- Wide pedal-to-shoe contact
- Lower platform height for pedaling stability
- Integrated cage increases stability and control when not clipped in and protects binding mechanism against impacts
- Robust retention claws provide smooth engagement and release
- Customize the entry and release tension settings
- Strong, durable chrome-molly spindle with 8 mm hex wrench mount
- Sealed mechanism
- 1.0 mm cleat spacer included
- Binding Dual sided
- SM-SH51 Cleat included
- Cleat retention adjuster
- Integrated cage
- Cartridge axle
- Average weight: 438g
- Optional cleat: SM-SH56
- Pedal Type: Off-Road (SPD)
$149.99
Size specific magnesium platform pedal provides optimal shoe/pedal interface.
Details
- Magnesium pedal body for weight reduction
- Optimal surface area
- Minimal body profile - 16mm thin
- Concave pin profile & 10 adjustable pins per side for grip
- Premium bearings & seal system
- Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu)
- Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu)
- Serviceable, pedal refresh kit found here
Specs
- Adjustable pins: 10 per side
- Body material: AM60B Magnesium Alloy
- Endcap: T15
- Footprint: 114mm x 111mm
- Inner bearing type: Igus Bearing
- Max rider weight: No restriction
- Outer bearing type: Double Cartridge Bearing
- Shoe size: US 10-15 // EU 43-49
- Spindle material: Forged SCM 415 Chromoly Steel
- Warranty: 5 years
- Weight: 386g per pair
$143.00
Chromag worked with Brandon Semenuk to design a pedal that features a lightweight, compact platform body that extends inboard bringing the riders feet closer to the cranks for superior control. The Contact pedal has a very low-profile, concave CNC’d surface that is only 13mm at pedal center and weighs in at only 190g per pedal.
$136.99
The Best Of Both Metals
The Aeffect pairs a thin, lightweight 6061-TI aluminum body with a cro-mo axel that runs our tried and true bearing and bushing set-up.
Surefooted As A Mule
You want traction? You got it. Bottom loading hex-head threaded pins give you all the bite and foot security you need.
Your True Colors Shining Through
Pick from three vibrant colors to compliment your build and your personal sense of style. Just don't choose wrong or they'll make fun of you.
Get Up Stand Up
Like a good trail dog, the Aeffect Pedal is most in its element on a flowy section of backwoods Nirvana. Designed with a smaller body, this strong, durable, rebuildable pedal is made to chase stoke all day long.
Specs:
- Axle Material: Chromoly Steel
- Body Material: 6061 Aluminum
- Material: 6061 Aluminum
- Platform Height (MM):16.9
- # of Pins: 20 SHCS hex traction pins per pedal (10 per side)
- Platform L x W (MM): 101 x 100
- Weight: 375g
$135.09
- All-road adventure/touring-inspired dual-sided clipless pedal
- AL6061 CNC machined platform with grip pins for added stability
- CNC-machined chromoly spindle
- LSL sleeve bushing and sealed bearing
- Shimano SPD style cleat with 5º float
- Fully adjustable tension
- Platform size: 90mm x 68mm
- Size: 9/16"
- Cleat Type: SPD
- Material: AL6061
$129.99
Dual-sided, SPD-compatible clipless MTB pedals are trail-worthy with a perfect balance between durability and weight
CLIP INTO CONFIDENCE ON THE TRAIL
The Line Elite Clipless Pedals have a durable forged aluminum cage to protect from rock strikes and give a confidence-inspiring platform for easily clipping in, all while quickly clearing mud and debris. The anodized plates add a stylish aesthetic and extra durability. These pedals are best for you if you want upgraded clipless trail pedals designed for durability and performance on every ride.
PRODUCT DETAILS
- Dual-sided SPD-compatible trail MTB clipless pedals
- Fully adjustable clip in & clip out tension
- Durable forged body with anodized plates for added durability & cage to protect against rock strikes
- The cage on trail pedals provides a platform for easily clipping in
- Dual sealed ball bearings with chromoly spindles for smooth spinning durability
- Install direction & torque spec listed on spindle
- Includes cleats and mounting hardware
$129.99
The exceptional comfort and versatility of the Speedplay Comp road pedal derive from its confidence-inspiring and stable platform, offering both value and performance mile after mile for cyclists of all levels. Precise engagement, effortless release, and dual-sided entry with the Easy Tension Cleat deliver ease of use and confidence to the rider.
Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimize fit and enhance performance through better biomechanics.
Versatile performance defines the advanced Speedplay system. Utilizing this innovative platform, Comp's confident engagement and stable platform provide benefits to riders at every level.
- Weight: 224g (per pedal pair)
- Spindle Material: Chromoly
- Spindle Length: 53mm
- Float: 5 to 15º Micro-Adjustable
- Cornering Angle: 37º
- Bearing: Sealed
$127.00
Featuring an optimal surface area for maximum engagement with a minimalist profile for maximum clearance, the all-new Pinner Pro flat pedal series is purpose built for the rigors of aggressive trail, enduro and DH shredding.
- Maximized concave surface area (2mm) combined with a minimalist profile for secure, efficient pedaling action.
- Durable forged A380 aluminum platform withstands the toughest impacts.
- Tough chromoly steel spindle for long lasting stability.
- 10 replaceable and adjustable metal pins (per side) for maximum foot engagement and security.
- Sealed cartridge bearing for smooth long-lasting performance.
$125.00
The KEO 2 MAX pedal is an excellent example of LOOK's design experience. With its wide contact area and composite body, it offers state-of-the-art technology for full power transfer, in an affordable package.
- Technology: Spring
- Cleats: Keo Grip
- Retention: 8 to 12
- Body: Composite
- Spindle: Chromoly+
- Platform material: Stainless Steel
- Platform area: 500mm²
- Platform width: 50mm
- Q Factor: 53mm
- Stack height + cleats: 17.3mm (11 + 6.3mm)
- Weight (pedal): 130g
- Weight (pair + cleats): 328g
$120.00
Shimano's PD-R550 SPD-SL Pedals offer wide, stable platforms for great support and stability when you're out on the road. An extra-wide platform maximizes power transfer. Durable stainless steel tread plates reduce flex and pedal body wear. Wide bearing placement provides uniform load distribution for miles and miles of riding.
- 310 grams (pair)
$119.99
- Low profile platform Pedal (18mm thickness)
- CrMo Axle, Bushing / Sealed Bearing
- High quality bearing system and replaceable pins
$118.99
- Extruded AL6061 aluminum CNC machined construction
- CNC chromoly spindle
- Sealed bearing and bushing
- One side SPD compatible
- Fully adjustable tension
- 9/16-inch spindle
- 295g pair
$115.99
Full contact body constructed of engineering grade thermoplastic with stainless steel abrasion guard
Heat-treated, CNC-machined Cr-Mo axle with LSL bushing, sealed and needle bearings
Fiberglass-reinforced thermoplastic, enclosed mechanism, tension adjustable binding
Compatible with Exustar road shoes and Look Keo style shoes/cleats
Size: 9/16" Bearing: LSL , Sealed, Needle
Color: Black Cleat Type: Look Keo
Style: Single Sided
$115.00
The EXPLORER PD-ES600 pedals are designed for rides requiring frequent engagement and disengagement, such as city touring. Light action springs allow for easy entry and exit, making the new rider feel more confident.
CLEAN APPEARANCE
- The PD-ES600 features a clean appearance body for use on lightweight road touring bikes.
EASY RIDER ADJUSTMENT
- Easy-to-adjust entry and release tension settings.
SYSTEM ENGINEERED TO WORK TOGETHER
- SHIMANO RT footwear is designed to match the PD-ES600.
$93.99 - $114.99
Get ready to ride
Take your riding to the next level with Bontrager Comp MTB pedals. A fully adjustable release tension lets you dial in the right feel for your ride and adds the confidence and efficiency of a secure connection to your bike. Durable materials and sealed cartridge bearings ensure lasting performance for this SPD-compatible pedal. Cleats and hardware included.
- MTB pedals with dual sided SPD-compatible engagement
- Durable Chromoly spindle for long-lasting durability
- Sealed cartridge bearings provide smooth, reliable feel
- Adjustable release tension
- Includes cleats and mounting hardware
- Spindle: 9/16-inch
$112.00
CNC machined 6061 aluminum pedal body
- 2 sealed bearings and 1 DU sleeve bushing
- 9/16" CNC chromoly spindle
- Ultra-thin 100mm x 104mm x 16mm platform
- Extra tall M4-10 SS replaceable pins
- 380g per pair
$110.00
Little pedal for big rippers. We created the Radar for the young rippers. Designed around a platform shaped to fit kids' feet in the age range of approximately 4-10 years old. The Radar is made with the same precision axle and bearing system as our Contact and Scarab models for smooth running and long durability. It is serviceable and re-buildable. It features a lightweight extrusion design with our custom pins and our unique concave platform shape.
$109.99
Crank Brothers' most versatile pedal. The Candy excels at it all—cyclocross, XC, trail, and all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel.
Specs:
- Spindle material: Forged scm 435 chromoly steel
- Body material: 6061-T6 aluminum
- Wing material: Stamped steel
- Spring material: 300 series stainless steel
- Release angle: 15° / 20°
- Q-factor: 52mm
- Inner bearing type: Igus LL-glide bearing
- Outer bearing type: Enduro cartridge bearing
- Cleat: Premium brass cleats with shims included
- Weight: 355g per pair
- Warranty: 5 years
Page 1 of 4
Next page