Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Cranksets

Sunlite Crank Dust Cap
$1.99
- Crank dust cap - Works with most three-piece crank models
Mission BMX Sprocket Crank Arm Bolt Profile
$2.49
Sprocket bolt for mounting sprocket on a crank arm. The low-profile head design works with 22T sprocket sizes and up. Installs with 6mm allen key. Product Specifications - Fits: All Standard Sprockets - Type: Profile Cranks (3/8" x 24tpi Thread) - Weight: 0.4oz
Race Face Alloy Crank Spindle Spacer
$2.51
- For Race Face 30mm Cinch System cranks only - Allows switching crank arms between bikes, such as a FatBike and an XC MTB - Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle
Race Face Chainring Bolt Pack
$2.54
Race Face aluminum chainring bolts for inner chainrings. Includes four 12.5mm bolts.
Sunlite Cottered Pin
$2.99
- Sunlite Cottered Pins
Mission BMX Bottom Bracket Spacers
$3.99
Assorted width bottom bracket spindle spacers for fine-tuning crank arm offset. Product Specifications - Compatibility: 19mm or 22mm Spindles - Includes: 2 x 0.6mm, 2 x 1.5mm, 2 x 3mm - Weight: 0.6 oz
Race Face X-Type Spindle Spacer Kit XC/AM Cranks
$4.49
Replacement spindle spacers for Race Face X-Type XC/AM cranksets.
Race Face M15 bolt for 2008+ Evolve and Ride
$4.55
Race Face 15mm crank bolt/puller for 2008 and newer Evolve and Ride cranksets.
Wheels Manufacturing Inc. BSA Bottom Bracket Spacer
$4.95
Wheels Manufacturing 2.5mm Black Aluminum Bottom Bracket Spacers are for adjusting chainline or bearing play in English (BSA) or Italian threaded bottom brackets.
Sunlite Aluminum Crankarm (Left)
$4.99 - $19.99
• Square taper interface • Only includes left crank
Wheels Manufacturing Inc. 30mm ID Crank Spindle Spacer
$5.00 - $6.95
Used to adjust crank chainline or ensure proper bearing preload when using 30mm spindle cranks. - Inner Diameter: 30mm - Outer Diameter: 41.5mm - Machined engineering-grade Delrin - Sold Individually
Wolf Tooth Components CAMO Chainring Bolt Kit
$5.00
Accessorize your CAMO system with these high quality bolts. Made from durable ED coated steel, they're designed specifically for the CAMO system. - Bolts designed specifically for use with CAMO spiders and rings - Includes 5 Torx head M5 x 8mm bolts - ED coated steel is durable - Bolts include a blue Nylok patch for a secure installation - Torque bolts only to 4-5 Nm and use blue Loctite threadlocker
Race Face X-Type Spindle Spacer Kit FR/DH Cranks
$5.39
Replacement spindle spacers for Race Face X-Type FR/DH cranksets.
Origin8 3.5mm Chainring Spacers
$5.99
Spacers to insure proper chainline and chainring spacing on your bike. - 3.5mm thick - Material: alloy
Race Face EXI Crank Bolt - M15
$5.99
Race Face Crank Arm Fixing Bolts - For EXI Cranks - M15
Race Face EXI Crank Bolt Puller Cap Washer
$5.99
Race Face Crank Arm Fixing Bolts - For EXI Cranks - Bolt Puller Cap Washer for self-extracting bolt
Sunlite Steel Cottered Crankarm
$5.99
• Forged steel • 6 1/2-inch • Compatible with 9/16" pedals • Left crank • Drilled for 9.5mm cotter pins
Mission BMX Crank Pinch Bolts
$6.00
Replacement crank arm pinch bolts that fit Mission cranks and many others. Includes two bolts. Product Specifications - Thread: M6 x P1.0 - Allen Key: 6mm - Includes: 2 Bolts - Weight: 0.5oz
Mission BMX Crank Spindle Bolt
$6.00
Replacement spindle bolt that fits Mission Transit cranks and many other cranks. Product Specifications - Thread: M8 x P1.0 - Allen Key: 6mm - Includes: 1 Bolt - Weight: 0.6oz
Kink Pillar 24 Crank Bolt
$6.99
Replacement spindle bolt for Pillar 24 cranks (24mm spindle) - Thread: M18 x P1.0
Kink Pillar Crank Bolt
$6.99
Replacement spindle bolt for 22mm Pillar Cranks. Tightens with 8mm Allen Key.
Race Face Cinch Direct Mount Lockring
$7.65
- 7075-T6 aluminum direct mount spider or lockring to fit Race Face Cinch system splined cranks - RF-3296 spider is required for running 2-ring setups with Boost (Race Face 1x Direct Mount rings work fine with Boost) - Mounts using a common Park BBT-22 tool
Kink PILLAR CRANK SPINDLE BOLT
$7.99
The Kink Pillar cranks use a unique one piece forged backplate that tie together the pedal and spindle bosses, while acting as an extremely stiff backbone to each crank arm. This design eliminates several weak points found in traditional tubular cranks, and increases the overall strength without adding weight.
Origin8 Double/Triple Chainring Bolts
$7.99 - $19.99
Secure your chainrings for your ride with Origin-8's Double/Triple Chainring Bolts. Made for double and triple chainrings, each set includes 5 male/female bolts to securely connect your chain rings to the crank. Available in black and silver, as well as aluminum or steel.
Problem Solvers Hex Crank Arm Fixing Bolt/Cap
$7.99
Problem Solvers Crank Arm Fixing Bolts - 8mm - Sold as a pair
Origin8 Single Chainring Bolts
$8.99 - $22.99
Revamp the look of your single speed cranks with some new hardware. Origin-8's Single Chainring Bolts give a high polished look to any crankset. The anodized finish comes in multiple colors to highlight your crank and makes it look as good as you do. You can also choose between steel or aluminum bolts. • Set of 5 male/female bolts • Inside measures 4mm when tightened, 7mm total height
Race Face 2008+ Next SL and 2012+ Atlas Crank Bolt/Puller
$8.99
Race Face crank bolt/puller for 2008 and newer Next SL cranks and 2012 and newer Atlas cranks.
Race Face Turbine/Next XC/SixC and 2008+ Deus Crank Bolt/Puller
$8.99
Replacement crank bolt/puller set for Race Face NEXT XC, SIXC, and 2088 and newer Deus cranks.
Race Face Alloy Crank Boot
$9.99
Trail riding can be tough on your gear. The ends of your alloy cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots - now made in a smaller version to fit most alloy MTB cranks. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips. Compatible with: - Race Face - Turbine Cinch - Atlas Cinch - Atlas (24mm Spindle) - Turbine (24mm Spindle) - Aeffect Cinch (175mm length ONLY) - Most other popular alloy MTB cranks (except some alloy DH cranksets)
Race Face M18 Crank Bolt - 15SX/Atlas/SixC CINCH
$9.99
Race Face Crank Arm Fixing Bolts - M18 Crank Bolt - Fits 15SX/Atlas/SixC CINCH - Self-extracting
Race Face Next SL G4 Crank Boots
$9.99
Trail riding can be tough on your gear. The ends of your Next SL G4 cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!
Sunlite Omni-Fit Chainguard
$9.99
• Adjustable aluminum chain guard • Fits front chainrings from 38T to 48T • Multiple clamp options fit seat tubes from 25.4 to 34.9mm • Black anodized finish
Sunlite Steel Cotterless Crankarm
$9.99
• Forged steel • 6 1/2-inch • Compatible with 9/16" pedals • Left crank • Cotterless
TruVativ M15/M22 GXP Crank Arm Self-Extracting Bolts
$10.80
TruVativ Crank Arm Fixing Bolts - Monocoque carbon crankset with hollow-arm design - FSA Mega Tooth chainring design greatly improves chain retention - FSA BB392 compatibility allows use in nearly any frame - Bottom bracket not included
Origin8 Inner Chainring Bolt Set
$10.99
Secure your chainrings for your ride with Origin-8's Double/Triple Chainring Bolts. Made for inner triple chainrings, each set includes 5 male bolts to securly connect your chainrings to your crank.
Race Face Torx Chainring Bolt/Nut Pack (Double Ring)
$10.99
Race Face aluminum Torx chainring bolt/nut set for double and triple chainrings. Includes four bolt sets.
SRAM Carbon Crank Arm Boot
$11.00
SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly intact.
SRAM Carbon Crank Arm Boots
$11.00
SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly in tact. - Injection molded plastic crank arm protection - Perfect way to protect your carbon crank investment from scratches and dents from pedal strikes - Material: Injection molded plastic - Recommended Group: XX1, X01, XX, X0
Wheels Manufacturing Inc. Crank Spindle Spacer
$11.50
Use these Wheels Manufacturing Crank Spindle Spacers to adjust chainline or bearing play in bottom brackets. - 24mm for Shimano Hollowtech II, FSA, Race Face EXI, SRAM GPX - 30mm for BB30, PF30, BB86, BB92 and other cranks with 30mm spindles - Machined engineering-grade Delrin - 10 spacers per bag
Wheels Manufacturing Inc. Repair Pack for T47 Inboard w/30mm Spindle Bottom Brackets
$11.50
Replacement spacer pack for Wheels Mfg T47 with Inboard bearing for 30mm spindle bottom brackets. Individual bearings sold separately. For use with: - T47-BB-30MM-BB - T47-BB-30MM-AC Pack Includes: - 2x - Dust Seal, 42mm OD, 30mm ID - 2x - 0.5mm, 30mm ID Crank Spindle Spacer - 2x - 1.0mm, 30mm ID Crank Spindle Spacer
Wheels Manufacturing Inc. 29mm ID x 0.5mm Crank Spindle Spacer, Bag of 10
$11.95
Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks. - 29mm I.D. for use with SRAM DUB cranks - 10 spacers per bag - Machined engineering-grade Delrin
Wheels Manufacturing Inc. 29mm ID x 1mm Crank Spindle Spacer, Bag of 10
$11.95
Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks. - 29mm I.D. - 1.0mm thick - 10 spacers per bag - Machined engineering-grade Delrin
Origin8 0.6mm Chainring Spacers
$11.99
Spacers to insure proper chainline and chainring spacing on your bike. • 0.6mm thick • Sold in a bag of 20 spacers
Origin8 Thruster Crank Arm Tip Protectors
$11.99
Crank arm tip protectors for Origin8 Thruster Crank Arm Tip Protectors fit all Thruster Series MTB, Boost, and Fat cranksets. Grab a pair to protect your crank arm tips from abrasions and impacts.
Race Face Crank Arm Outer Tab Spacers (Set of 4)
$11.99
Race Face Crank Arm Tab Spacers • Spacers are used to protect the outer chainring tabs and enhance aesthetic when no outer ring or bashguard is used • Fits all Race Face cranksets • Use double bolts
absoluteBLACK Chainring Bolt Set for 30T Oval Rings
$12.00
absoluteBLACK chainring bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability. - Replacement bolts for 30T 104 BCD oval rings
Sunlite One-Piece Crankarm
$12.48 - $20.99
- Forged steel - 24 TPI
FSA BB30 Crank Bolts
$13.99
- Self-extracting bolts for BB30 cranks: includes puller cap that threads into BB30 crank arms - Sold as singles
Sunlite Cotterless Unicycle Crankarm
$14.98 - $17.39
• Forged steel • Square taper • Compatible with 9/16" pedals • Pairs • Cotterless
Kink PILLAR CRANK INSTALLATION TOOL
$15.00
The Kink Pillar cranks use a unique one piece forged backplate that tie together the pedal and spindle bosses, while acting as an extremely stiff backbone to each crank arm. This design eliminates several weak points found in traditional tubular cranks, and increases the overall strength without adding weight.
SR Suntour XCT Left Crank Arm
$15.00
SR Suntour's XCT is a replacement left crank arm for square or diamond taper-oriented cranks that features aluminum alloy construction.
Sunlite Universal Chainguard
$15.99
- Universal bottom bracket style mount - 44T maximum chainring size - Impact-resistant plastic - Size: Universal - Application: BB Mount
Easton Chainring Bolts
$16.99
- Chainring bolts for double cranks - Torx heads
Shimano Crank Bolts
$17.00
- Octalink bolts include steel washers, JIS includes black plastic caps - HT2 mount bolts (low torque plastic, except XTR-M970 aluminum) are for mounting non-drive arm - Hollow bolts (SH-21504) not recommended for non-treated spindles
Wheels Manufacturing Inc. Crank Spindle Wave Washer
$17.95
Wheels Manufacturing Wave Washers help eliminate side play in cranks or pre-loaded angular contact bearings. Please refer to your crankset manufacturer's installation instructions for proper placement. - 24mm for Shimano Hollowtech II, FSA, Race Face EXI, SRAM GPX - 30mm for BB30, PF30, BB86, BB92 and other cranks with 30mm spindles - Uncompressed Thickness: 2.1mm - Compressed Thickness: 0.5mm - Spring Steel - 10 per bag
Kink Bottom Bracket Cone Kit
$17.99
Includes 2 Cone Spacers and 4 Washers to get the perfect crank spacing and bottom bracket bearing preload.
absoluteBLACK Chainring Bolt Set - Long Bolts and Nuts Set of 4
$17.99
absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability. - Bolts use a Torx T30 interface for greater reliability - Long bolts are used for the following chainrings: 110 BCD 4-bolt outer and inner road oval, 104 BCD oval 26/28/32t, 64 BCD round 26/28/30t, 94 BCD oval 30/32/34t, all CX round chainrings - Set of 4
Page 1 of 4 Next page