Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Kink BMX

$899.99
The Kink Williams is the flagship model in our line and our only signature bike with Kink Pro team rider Nathan Williams. The Williams is a no compromises bike, that gets as close to Nathan's personal ride as possible with a much more friendly price tag. Stacked with aftermarket parts, and superior manufacturing and materials, the Williams bike is the best of the best in BMX, no question. The translucent Matte Rattlesnake Brown colorway is truly unique and shows off the craftsmanship of the frame. The frame itself features both a double-butted toptube and downtube and is paired up to aftermarket Kink Foundation II forks with a short 26mm offset, and aftermarket Kink Williams 9.25-inch rise heat-treated bars. The impressive aftermarket components list continues with the Cinema Rewind 25t sprocket, Cinema Sync half-link chain, Cinema Williams 2.5-inch tires, and Cinema Martinez stem. The 2022 Williams also features Kink Ridge 48-spline cranks, Cinema ZX wheelset with four nylon hub guards, and four Cinema C4 pegs, so this bike is truly ready to ride straight out of the box.
$15.00
The Kink Pillar cranks use a unique one piece forged backplate that tie together the pedal and spindle bosses, while acting as an extremely stiff backbone to each crank arm. This design eliminates several weak points found in traditional tubular cranks, and increases the overall strength without adding weight.
$89.99
The Boulevard front wheel features the Kink Boulevard hub and is laced up to the Kink Atlas rim. This 36-hole wheel is hand laced, then tightened and trued to specifications. It’s 3x lacing pattern, 14-gauge spokes and brass nipples provide massive strength to stand up to plenty of riding abuse. All Kink wheels are wrapped with a Kink rim strip to provide increased protection between the rim and tube.
$129.99
The Kink BMX East-Coaster DTC freecoaster hub is based on the traditional and proven KHE style internals. For a full range of slack options, from small to big, three slack adjustment washers are included. This hub features a tough 14mm heat-treated chromoly axle, and a special angular contact bearing for additional side load support. The custom aluminum hardware cone is also compatible with the Kink Rear nylon hub guard. Our new Dual Threaded Clutch (DTC) system allows both LHD or RHD drivers to be installed, without opening the hub or replacing the clutch. Now you can simply replace the driver to change drive sides.
$39.99 - $40.00
The Kink Bedlam sprocket puts material where you need it, and takes it out from where you don’t. The simple spoked design gives a clean balanced look, while half depth reliefs on the back side remove additional unneeded material to keep the weight down. Accurately designed and lightly chamfered teeth create a smooth ride and chain seating. Fully CNC machined from 6.35mm thick 7075-T6 aluminum means this sprocket is built to take a beating.
$39.99
KINK SPLINE-DRIVE ASTRO SPROCKET The Astro sprocket is a true mix of form and function. Using heat-treated 4130 chromoly steel enables this sprocket to use thin spoke like patterns which create the unique look. The design itself inspired by the structure of an atom, has increased strength over similar spoke style sprockets due to the intersecting “orbits” or spokes. The Astro sprocket comes in a variety of sizes, and both bolt drive or spline drive options.
$189.99
The East-Coaster DTC wheel features the Kink East-Coaster DTC rear freecoaster hub and is laced up to the Kink Atlas II rim. This 36-hole wheel is hand laced, then tightened and trued to specifications. It’s 3x lacing pattern, 14-gauge spokes and brass nipples provide massive strength to stand up to plenty of riding abuse. All Kink wheels are wrapped with a Kink rim strip to provide increased protection between the rim and tube.
$20.99
The Kink Drift pegs are made of a tough 7075-T6 aluminum core and replaceable durable nylon composite outer sleeve. Kink spent nearly two years developing this unique nylon material that provides the perfect combination of slide and wear resistance. Drift pegs have a 1.5" outer diameter. Replacement sleeves are also sold separately. TECH SPECS - Material: 7075-T6 Aluminum core w/ nylon sleeve - Diameter: 1.5" (38mm) - Axle Size: 3/8" and 14mm - Weight: 3.4oz (each)
$29.99
The Kink Restrain brake lever is constructed from a fully forged aluminum lever, body, and bracket to maximize strength and stiffness. It features a low-profile, finger-friendly design as well as an ergonomically designed lever for added comfort. It's oversized hinge joints and pin increase strength and prevent cracks or breaks from over-tightening. The Restrain lever is also universal and can be used on the right or left side. Tech Specs - Material: 6061-T6 Aluminum - Bracket: Hinged - Lever: Medium ergonomic - Side: Right or left hand compatible - Weight: 2.5oz
$64.99 - $74.99
$1.99
Kink Velcro Cable Strap with Logo. Sold individually.
$59.99
The Kink Brawler rim is an aero style rim that is built to take a beating. The double wall design with welded seam construction provides a massive amount of strength and stiffness. The 6061-T6 aluminum extrusion profile is designed for added support and is drilled for straight spoke lacing. Extended height sidewalls mean this aero style rim can also be used with brakes.
$29.99 - $32.99
Balancing design, materials, and manufacturing techniques allow the Kink Bold HRD to truly be a solid and affordable stem. The die-cast aluminum body is paired with a forged 6061-T6 aluminum cap, providing additional strength. A counterbore in the stem body allows the fork cap bolt to thread down flush for a clean look. The classic 50mm reach comes with a comfortable 32mm rise and a traditional 6-bolt system. Chamfered edges and radiused corners give the stem a clean look and knee-friendly design. TECH SPECS - Reach: 50mm - Rise: 32mm - Stack Height: 30mm - Material: Aluminum Body and Forged Aluminum Cap - Bolts: Solid w/ 6mm Allen Hex - Weight: 10.7oz
$29.99 - $99.99
Featuring two precision sealed bearings, the Kink Integrated II headset provides long bearing life and super smooth function. The headset also includes a tall CNC-machined dust cover cap, and three assorted size color matched stack spacers to get the perfect stem height. This headset fits all integrated Campy-style frames. TECH SPECS - Cap Height: 15mm - Spacer Sizes: 2mm, 5mm, & 7mm - Bearing Size: Campy Spec (41.8mm x 45°) - Weight: 2.9oz
$21.99 - $40.00
The Kink Bedlam sprocket puts material where you need it and takes it out from where you don't. The simple, spoked design gives a clean, balanced look, while half-depth reliefs on the backside remove additional unneeded material to keep the weight down. Accurately designed and lightly chamfered teeth create smooth chain seating. Fully CNC-machined from 6.35mm thick 7075-T6 aluminum means this sprocket is built to take a beating. TECH SPECS - Sizes: 22T, 23T, 25T, 28T, 30T - Material: 7075-T6 Aluminum - Thickness: 6.35mm (1/4") - Type: Bolt Drive - Compatibility: 19mm, 22mm, & 24mm spindles - Weight: 2.4oz (25T)
$49.99
The Kink Eastman full guard sprocket was designed to take a beating, and it’s built-in guard will protect your chain in the process. The machined crank arm reliefs create proper clearance for all popular cranksets, and the guard offset accommodates all chain widths which give the Eastman sprocket maximum compatibility. It’s technical design creates a clean and symmetric aesthetic, and provides massive strength where it’s needed. Two rotation positions extend the life of the Eastman’s built-in guard even further.
$64.99 - $74.99
$7.99 - $23.99
KINK BOULEVARD HUB PARTS The Kink Boulevard hub was designed to handle modern day street riding and heavy peg use, without sacrificing on aesthetics or weight. The inner 15mm 7075-T6 aluminum axle uses a floating bearing system, which prevents side-load which could shorten bearing life. The hub shell itself is fully CNC machined from tough 7075-T6 aluminum, creating a strong body and flanges that can take plenty of stress from the spokes
$7.99 - $32.99
The Yukon wheel features the Kink Yukon rear cassette hub and is laced up to the Kink Atlas rim. This 36-hole wheel is hand laced, then tightened and trued to specifications. It’s 3x lacing pattern, 14-gauge spokes and brass nipples provide massive strength to stand up to plenty of riding abuse. All Kink wheels are wrapped with a Kink rim strip to provide increased protection between the rim and tube
Page 1 of 3 Next page